How Tree Removal Is Done

Tree removal is a big job and should be done by a professional. A professional is able to assess the condition of the tree and make an informed decision about its health. This can help prevent property damage and injury to people working in the area. In some situations, however, a tree is determined to be so damaged or hazardous that it needs to be removed. This can happen when a tree is located too close to homes or power lines, or it has become diseased and unstable.

Depending on the location of the tree, the tree service may choose to fell the entire tree or remove it in pieces. Both methods have their own advantages and disadvantages. A tree over houses will likely need to be felled to avoid property damage and injuries. A tree in a wide open field may be easier to remove in pieces.

If a tree is determined to be unsafe, a professional will typically start by cutting off lower branches. These should be cut with a saw and dropped to the ground carefully, as they are heavy. A limb that is in the process of falling should never be backed up against or pinned to any object, as this could cause it to fall and possibly injure or destroy anything in its path.

Next, the tree service will move on to a stage called limbing, which involves cutting off remaining branches and limbs in preparation for removal. Those that are in the process of falling should be limbed on both sides to minimize their weight, as well as a few inches away from where the upper and lower cut intersect. This will help control the direction and speed of the tree’s fall.

If the tree is to be removed in sections, a final ‘felling cut’ will then be made on the back side of the trunk. This is designed to direct the tree’s fall and reduce the potential for unforeseen problems during the process. The rest of the process is similar to that of removing a single-trunk tree.

Once the final cuts have been made, the remaining logs will be loaded onto a log truck for transport to the nearest landfill. In some cases, the wood will be chipped and used as mulch on the property where it was removed. This can be a great way to reuse natural resources and protect the environment. It can also help homeowners save money on costly waste disposal fees. Stump grinding is another option for removing large stumps, but this is best left to professionals who can use specialized equipment. To prepare a stump for grinding, it is recommended that the ground be wetted down the day before using hand tools to dig out the dirt. Larger stumps can be ground with a machine to eliminate the need for manual labor and ensure safety. The resulting mulch can then be spread on the property to suppress weeds, prevent erosion, and add nutrients to the soil.